Diaphragm Pump N86KNE N86KTE Continuous Emission Monitoring System Sampling Pump

This product is used in industrial process gas cContinuous Emission Monitoring System (extraction measurement) for gas extraction, with internal anti-corrosion, and is particularly suitable for flue gas analysis. It can extract gases such as SO2, NOX, CO2, CO, N2, O2, etc.

Technical parameters:

(1) Model: N86KNE/N86KTE

(2) Extraction volume: 6 liters per minute

(3) Power supply: 220-230VAC 50HZ

(4) Interface: 1/8 '' internal thread

(5) Piping: Φ 6 PTFE pipe

(6) Work pressure: Pmax：2.5Bar

(7) Power: 60W

Installation method:

This product adopts panel installation, with installation hole spacing of 48mm. The size of the installation hole is 4- Φ 5.

Daily maintenance:

This product is an oil-free diaphragm vacuum pump that does not require refueling. If there is internal blockage or contamination, please open the top four screws, clean the sealing gasket, and clean the pump membrane. If the pollution is severe and causes air leakage or insufficient gas supply during the sampling process, the pump membrane needs to be replaced in a timely manner.